HVAC Terms | Common terminology & definitions:
All Definitions Provided By Bryant.com
AFUE
Annual Fuel Utilization Efficiency. Indicated as a percentage, your furnace's AFUE tells you how much energy is being converted to heat. For example, an AFUE of 90 means that 90% of the fuel is being used to warm your home, while the other 10% escapes as exhaust with the combustion gases. Back to Terms
Advanced Reciprocating Compressor
Type of compressor that uses a more efficient process for compressing refrigerant for better cooling efficiency. Back to Terms
AeroQuiet System
Bryant's AeroQuiet™ System includes sound-deadening features in the cabinet, fan system and top for better air flow, lower noise and better efficiency. Back to Terms
Air Handler
The portion of your air conditioner or heating system that forces air through your home's ductwork. Back to Terms
BTU
British Thermal Unit. Used for both heating and cooling, BTU is a measure of the heat given off when fuel is combusted. Or for cooling, it's a measure of heat extracted from your home. (One BTU is approximately equal to the heat given off by a wooden kitchen match.) Back to Terms
BTUH
A British Thermal Unit (BTU) is the unit of heat required to raise 1 pound of water by 1 degree Fahrenheit. BTUH is British Thermal Units per Hour. Back to Terms
Beckett Burner
A burner assembly within your oil furnace, manufactured by Beckett to exact specifications of Bryant. This burner provides good combustion of heating oil. Back to Terms
CFM
Stands for Cubic Feet per Minute. A measurement of airflow that indicates how many cubic feet of air pass by a stationary point in one minute. The higher the number, the more air is being forced through the system. Back to Terms
Capacity
The ability of a heating or cooling system to heat or cool a given amount of space. For heating, this is usually expressed in BTUs. For cooling, it is usually given in tons. Back to Terms
Carbon Monoxide
A colorless, odorless, highly poisonous gas produced when carbon-based fuels, such as natural gas, burns without sufficient air nearby. Back to Terms
Check-Flo-Rater
The patented Check-Flo-Rater metering device accurately controls refrigerant flow to ensure precise system operation, efficiency and performance. Back to Terms
Compressor
Part of the heat pump or air conditioner unit that controls the pressure applied to the refrigerant, necessary for taking in heat to warm your home or getting rid of heat to keep your home cool. Back to Terms
Condenser Coil
Part of the outdoor portion of a split-system air conditioner or heat pump. By converting refrigerant that is in a gas form back to a liquid, the coil sends heat carried by the refrigerant to the outside. Also referred to as an Outdoor Coil. Back to Terms
Continuous Fan Switch
A feature on an oil furnace allowing the furnace's fan to blow continuously to improve system efficiency and maintain even temperatures. Back to Terms
Control System
Thermostat, Thermidistat™ or Evolution™ Control device used by homeowner to set temperature and other settings. Back to Terms
DB
Decibels (dB) are a unit measuring the intensity of noise. Back to Terms
Damper
A type of "valve" used in duct work that opens or closes to control airflow. Used in zoning to control the amount of warm or cool air entering certain areas of your home. Back to Terms
Downflow
A type of furnace that takes cool air from the top and blows warm air to the bottom-common where your furnace must be located in a second-floor closet or utility area. Back to Terms
Ductwork
Hollow pipes used to transfer air from the Air Handler to the air vents throughout your home. Ductwork is one of the most important components of a home heating and cooling system. Back to Terms
DuraGuard
DuraGuard™ is a Bryant innovation that protects outdoor units from weather and increases durability. Back to Terms
DuraGuard Plus
DuraGuard™ Plus is a Bryant innovation that protects outdoor units from weather and increases durability. DuraGuard Plus includes appliance-style fit and finish and a world-class patent pending design. Back to Terms
EER
Energy Efficiency Ratings (EER) measure the efficiency with which a product uses energy to function. It is calculated by dividing a product's BTU output by its wattage. Back to Terms
Electronic Air Cleaner (EAC)
An electronic device that filters out large particles and contaminants in indoor air. It then electronically pulls out tiny particles that have been magnetized, such as viruses and bacteria, drawing them to a collector plate. Back to Terms
Energy Saver Switch
An energy-saver switch causes the air conditioner's fan and compressor to cycle on and off together, reducing energy use. Back to Terms
Energy Star
Energy Star is a government-backed program helping businesses and individuals protect the environment through superior energy efficiency. Products with the Energy Star rating will be efficient and save cost on energy bills. Back to Terms
Evaporator Coil
Part of a split-system air conditioner or heat pump located indoors. The evaporator coil cools and dehumidifies the air by converting liquid refrigerant into a gas, which absorbs the heat from the air. The warmed refrigerant is then carried through a tube to the outdoor unit (condenser coil). Also referred to as an indoor coil. Back to Terms
Everlastic
Everlastic describes the Bryant-patented polypropylene coated secondary heat exchanger which provides enhanced durability over traditional heat exchangers. Back to Terms
Fan Coil
An indoor component of a heat pump system, used in place of a furnace, to provide additional heating on cold days when the heat pump does not provide adequate heating. Back to Terms
Freon
The trade name Freon™ is a registered trademark belonging to E.I. du Pont de Nemours & Company (DuPont). Production of Freon™ will cease in 2015 per the Montreal Protocol. Back to Terms
HSPF
The Heating Seasonal Performance Factor is a measure of the heating efficiency of a heat pump. The higher the HSPF number, the more efficiently the heat pump heats your home. Back to Terms
HVAC
Term used for Heating, Ventilation, and Air Conditioning. Back to Terms
Heat Exchanger
The part of a furnace that transfers heat to nearby air. That air is then distributed through the ductwork throughout your home. Back to Terms
Heat Pump
A heating and air conditioning unit that heats or cools by moving heat. Back to Terms
Horizontal Flow
A type of furnace, installed on its "side", that draws in air from one side, heats it and sends the warm air out the other side. Most often used for installations in attics or crawl spaces. Back to Terms
HumidiTrac
An automatic programmable control used to maintain humidity at a fixed point. Back to Terms
Humidifier
A piece of equipment that adds water vapor to heated air as it moves out of the furnace. This adds necessary moisture to protect your furnishings and reduce static electricity. Back to Terms
Humidistat
A control used to manually maintain humidity at a fixed point. Back to Terms
Hybrid Heat
Hybrid Heat systems deliver exceptional performance by using a heating source that provides the most energy-efficient comfort during moderate heating conditions. Back to Terms
IAQ
Indoor Air Quality (IAQ) refers to the cleanliness and health of the air in a home. Click here to learn more about IAQ. Back to Terms
Indoor Coil
Load Estimate
A series of studies performed to determine the heating or cooling requirements of your home. An energy load analysis uses information such as the square footage of your home, window or door areas, insulation quality and local climate to determine the heating and cooling capacity needed by your furnace, heat pump or air conditioner. When referring to heating, this is often known as a Heat Loss Analysis, since a home's heating requirements are determined by the amount of heat lost through the roof, entry ways and walls. Back to Terms
Low Boy
Low Boy is a type of furnace configuration in which the furnace is lower in height and occupies more floor space. Back to Terms
MERV
The Minimum Efficiency Reporting Value is the standard comparison of the efficiency of an air filter. The MERV scale ranges from 1 (least efficient) to 16 (most efficient), and measures a filter's ability remove particles from 3 to 10 microns in size. Back to Terms
Matched System
A heating and cooling system comprised of products that have been certified to perform at promised comfort and efficiency levels when used together, and used according to design and engineering specifications. Back to Terms
Multipoise
A multi-direction configuration that allows for both upflow and downflow installations. Back to Terms
Operating Cost
The day-to-day cost of running your home comfort equipment, based on energy use. Back to Terms
Outdoor Coil
Payback Analysis
Overall measure of the efficiency and value of your home comfort system. By combining your purchase price and ongoing operating costs, a payback analysis determines the number of years required before monthly energy savings offset the purchase price.
PerfectHeat
PerfectHeat® provides two stages of heating to battle changing winter conditions. At start up, low stage heating gently circulates warm, heated air into your living space. As outdoor temperatures become more extreme, high stage heating provides the extra boost you need to remain comfortable. Back to Terms
PerfectHumidity
PerfectHumidity™ is Bryant's proprietary humidity management innovation for maintaining the perfect comfort in a home. Click to learn more about PerfectHumidity. Back to Terms
PerfectLight
PerfectLight is an advanced gas furnace ignition system that replaces standard pilot lights and improves upon traditional modern igniters used by other manufacturers. Back to Terms
Puron Refrigerant
Puron® Refrigerant is an environmentally sound refrigerant designed not to harm the earth's ozone layer. Federal law requires all manufacturers phase out ozone depleting refrigerants in the next few years. Puron Refrigerant is approved by the US Environmental Protection Agency as a replacement from R-22. Click to learn more about Puron. Back to Terms
QuieTech
QuieTech™ is a noise reduction system that provides comfortable heat while generating very little noise in the process.
R-22 refrigerant
R-22 is a single component HCFC refrigerant with low ozone depletion potential. It has long been used in a variety of air-conditioning and refrigeration applications in a variety of markets. Production of R-22 will cease in 2015 per the Montreal Protocol. Also commonly known as Freon. Back to Terms
Reciprocating Compressor
A type of compressor used in air conditioners that compresses refrigerant by using a type of "piston" action. Back to Terms
Reclaiming
Involves returning used refrigerant to the manufacturer for disposal or reuse. Back to Terms
Recycling
Removing, cleaning and reusing refrigerant. Back to Terms
Refrigerant Lines
Two copper lines that connect the Condenser (Outdoor) Coil to the Evaporator (Indoor) Coil. Back to Terms
Riello Burner
A burner assembly within your oil furnace, manufactured by Riello to exact specifications of Bryant. This burner provides a cleaner, higher quality combustion of heating oil to increase energy efficiency. Back to Terms
SEER
The Seasonal Energy Efficiency Ratio is a measure of the cooling efficiency of your air conditioner or heat pump. The higher the SEER number, the more efficient the system is at converting electricity into cooling power. Back to Terms
Scroll Compressor
A specially designed compressor that works in a circular motion instead of an up-and and-down piston action. Back to Terms
Serpentuff
Bryant's exclusive Serpentuff™ Heat Exchanger features a patented polypropylene laminate, so that it extracts nearly all of the heat from the system and makes the most of the energy used. Back to Terms
Setback Thermostat
A state-of-the-art electronic thermostat with a built-in memory that can be programmed for different temperature settings at different times of the day. Back to Terms
Single Package
One outdoor unit that contains both a heating and a cooling system. Back to Terms
SmartRecovery
Smart Recovery starts the system in advance to be sure that each zone reaches your selected temperature setting at the scheduled time. Back to Terms
Split System
Refers to an air conditioner or heat pump that has components in two locations. Usually, one part of the system is located inside (evaporator coil) and the other is located outside your home (condenser coil). Back to Terms
Thermidistat
The Thermidistat Control monitors temperatures both inside and outside, as well as indoor humidity and adjusts system operation to maintain the temperature and humidity levels set by the homeowner. Back to Terms
Thermostat
Unit that monitors and controls your HVAC system products. Back to Terms
Thermostatic Expansion Valve
A thermostatic expansion valve (TXV) is precision device used to meter the flow of liquid refrigerant entering the evaporator at a rate that matches the amount of refrigerant being boiled off in the evaporator. Back to Terms
Ton
A unit of measure for cooling capacity. One ton = 12,000 BTUs per hour. Back to Terms
Total Home Comfort System
The ultimate solution to providing you with consistent, customized home comfort, despite the ever-changing weather. Back to Terms
TrueSense Dirty Filter Detection
TrueSense™ dirty filter detection reminds you when it's time to change your media filter. Back to Terms
UL
UL is an objective, non-profit organization that tests and rates electrical products for public safety. Back to Terms
Upflow
A type of furnace that draws cool air from the bottom and blows the warmed air out the top into the duct work. This type of furnace is usually installed in a basement or an out-of-the-way closet. Back to Terms
Ventilator
A ventilator captures heating or cooling energy from stale indoor air and transfers it to fresh incoming air. Back to Terms
Zone Perfect™Plus
Our exclusive zoning system, designed to work in conjunction with properly matched HVAC products to enhance energy efficiency by as much as 30%. Back to Terms
Zoning
A way to increase your home comfort and energy efficiency by controlling when and where heating and cooling occurs in a home. Programmable thermostats are used to control operating times of the equipment. Dampers are used to direct air flow to certain parts or "zones" of the home. Back to Terms
All Definitions Provided By Bryant.com
Repair or Replace | Which option is best for you?
As Heating & Cooling specialists, it's our job to help you decide when you need to repair your existing system or replace it with a new one. As with many things, there is no right or wrong answer to this question, but instead, many different variables that can help us point you in the right direction. Some of our customers want us to make this decision, but the choice ultimately rests with you.
When trying to decide if you should repair or replace an existing system, there are several things you need to consider. The most important are a system's life expectancy, the operating cost of your system & the overall operating efficiency. All three of these are closely correlated to your system's performance.
But does that mean you should replace your system? Not necessarily. Considering the next two paragraphs should help you to better understand your options.
How old your current system is, the cost to operate your system & the overall affects of keeping it should give you the tools to make your decision a little easier.
There are many different variables that work together to create your home comfort. At Derden Heating & Cooling, we'll go through all your components & figure out the best way to save you money on your bills, while offering you the best quality equipment for your budget. Because the combination of what makes your home heating & cooling system more efficient is different than others, we take a thorough look at your existing equipment to determine the best way to save you money. Whether you're interested in repairing or replacing an old system, give us a call at 870-673-1356 or toll free at 1-800-376-4177 & we can discuss your options. Also, feel free to visit our Equipment Sales page to learn more about high efficiency heating & cooling systems.
Be Your Own Troubleshooter, because at Derden Heating & Cooling, More Options + Better Solutions = Happy Customers!
Expert Categories:
Specific Bryant Equipment Questions:
General Heating & Cooling Questions:
Don't see what you're looking for? Visit our Contact Us page & send us a message or call us at 870-673-1356. We would be glad to answer any questions you may have.
LEGAL DISCLAIMER:
Derden Inc. is not liable for any loss or damages that result from someone performing there own repair(s) based on the information or guidance provided on this page. It is always safer to hire qualified professionals to perform your service repairs. Derden Inc is only liable for the physical services they provide.
All Bryant literature provided by Bryant.com.
Self Preventive Maintenance | What you can do on your own to prevent future problems:
Regular maintenance on your heating & cooling system plays a vital role in the over all life expectancy & operating efficiency of your equipment. Below are a few things you can do yourself to help lengthen the life of your equipment & ultimately save money on your energy bills:
Keep debris & leaves away from your air conditioning unit.
Keep the air filter in your fan coil or furnace clean by checking & cleaning it every 3-4 weeks. *Safety Tip: Be sure to remove all electrical power before removing any access panels*
Check to see if the placement of your outdoor unit is on a level surface.
Clean your humidifier at the beginning of each heating season.
In addition to this self maintenance, your system requires many other maintenance tasks in order to operate efficiently. These specific tasks can only be done by a heating and cooling professional. If you are interested, please visit our Preventive Service page to learn more about our valuable Annual Preventive Service Program and how we can help you with lowering your energy costs, extending your system's life, and saving you money on your service at the same time.
Common Issues | What's wrong & what are your options:
We have compiled a general list of common heating & cooling problems. Please click the option below that describes your issue to learn what you can do & when you need to call us:
No Cooling | No Heating | Heater Makes a Funny Smell | No Airflow | Really High Energy Bills | System Will NOT Shut Off
No Cooling:
One of the most common reasons your system quits cooling, is because a breaker is not turned to ON or a breaker has tripped. However, in some cases a fuse may have blown. On the other hand, it could be as simple as your thermostat settings being correct. First check to make sure that they are set based on the temperature you desire. If that is not the case then you need to check the breakers relative to your system. All breakers associated with your system should be switched to ON. If they are already turned to ON, you then need to check the fuses & see if they are blown. If so, you simply need to change out the blown fuse. Click here to see the safety information regarding changing a blown fuse. Your safety is very important, please read safety precautions carefully. This possible solution may or may not solve your problem. If the problem persists, please call us at 870-673-1356 to schedule a service call or you can follow this link to Schedule Service Online.
No Heating:
Likely causes for this problem are that gas has been turned off to your house, your system is turned off or unplugged, a tripped circuit breaker or again, a simple thermostat setting malfunction. Always check your thermostat settings first, as this is the easiest troubleshooting process. If your system has been unplugged, simply plug it back in. This should be the primary cause for loss of heat, but not always. If the system still doesn't come on after 5 minutes of being plugged back in, then you will need to follow the proper steps to troubleshoot further. If the source of the problem is a tripped breaker, you will need to check all relative breakers. Click here to troubleshoot a tripped breaker or blown fuse. To find out if your gas has been turned off, check all associated valves(the gas valve at the gas company's meter, the shutoff valve at the furnace & any other associated shutoff valves). If your gas has been shutoff, then you will need to contact your Gas company to find out why & have them turn it back on. If none of these options solve your problem, you will need to call us at 870-673-1356 to schedule a service call or click the following link to Schedule Service Online.
Heater is Making a Funny Smell:
In most cases, this is not a problem at all. More than likely, your system is burning off dirt that has built up over the off season. However, this might be an electrical problem. One way you can tell is if you smell the odor & it disappears after a couple of minutes, you most likely do not have a problem & it's simply your system burning off dirt & dust. On the other hand, if the smell persists & does not dissipate, you could have an electrical issue. If this is your situation, call us immediately at 870-673-1356 or toll free at 800-376-4177 for service. Electrical problems can be very serious & do not need to be taken likely. If for any reason you think that this may be an electrical problem, do not hesitate to call us as the issue will need to be diagnosed & fixed promptly.
No Airflow:
There are are two common culprits for this problem. One, your filter is dirty & needs to be replaced or your system has froze up because of a dirty coil. First, check all of your system filters for dirt and build up. If your filter(s) are very dirty, you will need to come by and purchase a new filter(s). However, if that is not the problem, you need to check for water below the unit & a cold surface on the exterior of coil or you may even see ice build up on the copper lines. If these symptoms are present, your unit has froze up. You can try turning off your thermostat for a couple of hours to see if the unit will defrost. But, more than likely, you will need to call us and schedule a service call to have a qualified technician come out and properly diagnose and solve your problem, as there are many different variables that could be involved with this type of problem & certain steps will need to be taken. Call our office at
870-673-1356 or click the following link to Schedule Service Online.
Really High Energy Bills:
Besides the obvious reasons like your energy company raising local rates or temperatures being in the "extreme", there are many other factors that can cause unnecessary high energy bills. To learn more, visit our Innovative Solutions page. There, you will find a wealth of valuable information to help you save money on your bills all year long.
System Will NOT Shutoff:
This tends to happen when temperatures outside are at an extreme. Your system will run until it reaches the desired temperature that you set. However, on extreme temperature days, your system may run for long periods of time because it is trying to reach the desired temperature point. Try adjusting your thermostat to a more reasonable temperature, relative to the season. This should give your system a break and allow it to catch up and reach the desired temperature point. On the other hand, this is not always the solution to your problem. If this doesn't work call us at 870-673-1356 to schedule a service call or you can Schedule Service Online. If this issue persists, you may have a more serious problem. Calling at the first sign of trouble could save you a much larger expense down the road. So please do not hesitate to cal if your problem does not subside.
Troubleshooting | What you can do before you call us:
Troubleshooting a heating and cooling problem yourself could save you the expense of a wasted service call. The information listed here can be used to troubleshoot general heating & cooling problems. If this information does not help you or solve your problem, you may need a service technician to come check your system. If this is the case please give us a call at 870-673-1356 or Schedule Service Online, so that your problem may be properly diagnosed.
1. Make sure your thermostat settings are correct, relative to the season & the temperature you desire.
2. Check to make sure that your disconnect switches & breakers are switched to ON . If they are turned to OFF, simply turn the
3. Check to make sure that you do not have any blown fuses.
Your safety is very important, so if you do not feel comfortable doing this, simply give us a call at 870-673-1356 & we will send a technician to your home to change the fuse.
If none of these options work, then you will need to schedule a service call & have a qualified technician come to your home & check your system. You can Schedule Service Online or call our office at 870-673-1356 to set up an appointment. If you simply have a question, you can visit our Contact Us page & send us your question right now or call us at the number listed above.
Central Systems | What they are & how they work:
Literature provided by Bryant.com
A central heating and cooling system produces warm or cool air in one central area and then distributes it throughout the home. There are many types of systems that work as central systems, from traditional split systems to packaged product systems.
Products typically used in central heating and cooling systems include:Heat Pumps Air Conditioners Gas and Oil Furnaces Fan Coils Evaporator Coils Controls and Thermostats Energy Efficiency | What are your options?
When evaluating your home heating and cooling options, efficiency and cost savings are extremely important. Plus, if your family is environmentally conscious, efficient heating and cooling products can help by using fewer energy resources. Literature provided by Bryant.com
Today, you have many equipment options when it comes to energy efficiency. With quality brands like, Bryant, Trane & Lennox, we have the equipment to help you start saving money this month & all year long. Visit our Equipment Sales page to learn more about your high efficiency options or visit our Bryant Bonus page to learn about Bryant's current promotion & how you could get up to an $1100 rebate on qualified equipment. If you have any questions, feel free to visit our Contact Us page or give us a call at
870-673-1356. We would be happy to answer any questions you may have.
Home Comfort | What are the internal & external elements of comfort?
There are many different variables that contribute to your comfort, both internally & externally. Primarily, you should be concerned about 4 main elements: Temperature, Air Quality, Humidity & the Controller, most commonly known as a Thermostat.
Freon | What it is & how it affects everyone:
Freon is a refrigerant used in air conditioning and heat pumps, also known as R-22. This form of refrigerant was once considered harmless. However, today science has shown that Freon R-22 has a large impact on the ozone layer & ultimately our health. This is due to the fact that the R-22 refrigerant contains more CFC's or chlorofluorocarbons, which increases global warming. The new product replacing R-22 is called Puron or R-410A. This new refrigerant contains less CFC's & has a much lower impact on the ozone layer & global warming.
Starting in 2010, the previous refrigerant, Freon R-22, will no longer be produced, however, can be used until the year 2030. But what does this mean for you? This means you have until 2030 to purchase a system that does not operate on R-22, but instead operates with a more environmentally friendly version, such as Puron. Due to this phase out, the cost of Freon is expected to increase as the supply grows obsolete. The good news is that you can purchase systems with Puron capabilities today. Although your current system may not be prepared for the new refrigerant, depending on the year you bought it, your system may be able to use the environmentally friendly refrigerant. Give us a call at 870-673-1356 or visit our Contact Us page to send us a message right now, we can help you determine which refrigerant your system can use & the options available to you, if your system is much older.
HVAC Innovation | What's new in technology, the environment & your health:
See our Innovative Solutions page to learn more.
If this does not solve your problem, continue to the next step.
breakers back on to see if this fixes your problem. If the breakers have tripped, you may need to reset the breaker box before the problem will be fixed. But keep in mind that breakers trip for a reason & simply resetting the breaker box may only delay an even bigger problem & expense down the road.
If a blown fuse is your problem, then you simply need to change the fuse(s) in question. However, certain precautions need to be taken for your safety. If your comfortable changing a fuse(s) then you need to make sure you turn off all power to the fuse box. But, as with Breakers, fuses blow for a reason, & there may be a more serious problem that you do not know about.
Life Expectancy:
Most systems have a life expectancy of about 10-15 years. Through out a system's life, it will experience break downs, just like other equipment you depend on. When this happens, we tend to want to fix the exposed problem and not proceed further. But, what most home owners don't keep in mind, is that there could be other problems associated with the 1 exposed problem & with older systems, the chances for this scenario to happen are very likely. In such a case, it doesn't make much sense to spend the money to repair an old system when it has several problems. On the other hand, with a newer system, simply ignoring the possibility of hidden problems could cost you a lot of money down the road & drastically reduce your system's life expectancy.
Operating Costs:
Today's energy efficiency standards are much better than previous years. New systems, for example, operate at a much lower cost compared to systems that are only a few years old. When you repair an older system, your efficiency will only be as high as it's current efficiency standard, which is most likely, not very efficient at all. With today's efficiency standards, systems like the Evolution Series from Bryant, can now save you up to 56% on your heating & cooling costs alone. But there is also one more detail to consider.
Overall Operating Efficiency
In order to get the most efficiency from your system, all components
must be properly working together. If you replace your old system,
but keep your old thermostat, you're not going to reap all the benefits
of your new system. A new high efficiency system paired with a new
programmable thermostat, for instance, could actually do miracles
for your energy bills. Separately, however, you may not see much of a difference at all without replacing the propper components.
Temperature:
For most people, this is a "no brainer". Obviously the temperature inside your home needs to keep you comfortable, and that level is different for everyone. Even so, keeping the temperature inside your home comfortable solely depends on the temperature outside & your system's ability to keep up. Whether that's during the hottest summer day or the coldest winter night. This is why it is so important to match the right system with the right locations & conditions. Visit our Equipment Sales page to learn more about the products we offer for both heating & cooling. It's our job to help you decide which systems fit your conditions, so feel free to call us at 870-673-1356 or visit our Contact Us page if you're thinking of making updates to your current system. We would be happy to give you an free estimate on the system that fits you best & keeps you comfortable all year long!
Air Quality:
This topic is especially important for allergy sufferers but important to all of us as well. Without proper air quality systems, we all run the risk of breathing mold, pollen, pet dander, dust, harmful chemicals & more. Many people breathe in harmful particles like these everyday. However, there is something you can do to feel better & keep your home more comfortable. Air cleaners & Ventilators are ways in which you can have cleaner air quality in your home. Visit our Innovative Solutions page to learn more about air cleaners available at Derden Heating & Cooling. While you're there, make sure to check out the helpful indoor air quality tips & myths you may not know about.
Humidity:
Most people forget about old Mr. Humidity & our comfort would not exist with out it. Without proper humidity, the other elements' jobs would be useless to your comfort. In the summer, we would prefer less humidity to be comfortable. This is because higher humidity during the summer gives our skin a sticky feeling, as well as an uncomfortable heating effect. However, during the winter, we prefer a higher humidity to keep the air from being too dry. Dry air can cause static electricity, dry skin, and even damage wood furnishings in your home. Luckily, our region does not experience this dry air problem, relative to the northern states.
Controllers:
A newer Heating & Air System is the only appliance in your home that can pay for itself over time!
Derden Inc. | Stuttgart, AR
Thermostats | What they are, the difference & how they affect your energy bills:
The term "thermostat" commonly refers to any unit that controls the operation of a heating and cooling system. Thermostats are used to turn on heating or cooling systems to bring the home to a set temperature. In addition to basic temperature control, programmable thermostats can be used to manage the timing of the system’s functions, which can control overall energy use and costs. Literature provided by Bryant.com
Derden Heating & Cooling offers the best quality programmable & non-programmable thermostats, as well as the Internet Controllable Thermostat. Visit our Innovative Solutions page to learn more about thermostats & all the different ways Derden Heating & Cooling uses technology to make your home more comfortable & save you money. Feel free to give us a call at 870-673-1356 or visit our Contact Us page to send us a question or comment right now.
HVAC License #: 155654
2009 Contractors License #: 0040140709
FULLY INSURED & BONDED
